Jeep Liberty Firing Order (2024)

FAQs

What is the firing order for a 3.7 Jeep Liberty? ›

It's easy once you know the firing order of this 3.7L engine. FIRING ORDER 1,6,5,4,3,2 First take the firing order and split it down the middle, making two halves (165) and (432) Second stack the numbers. In other words pair up the first number of each half, then the second numbers to each other, then the third ones.

The firing order on your 2012 Jeep Liberty with the 3.7 engine is 1-6-5-4-3-2 and the #2 cylinder is the first cylinder (front) on the passenger side of the engine.

When your Jeep Liberty won't start, it can be due to several reasons, ranging from battery issues to problems with the fuel system or ignition switch. Identifying the cause is essential to finding an effective solution and getting your vehicle back on the road.

Most 60 degree v6s firing order is 1-2-3-4-5-6 right down the crankshaft.

It uses a firing order of 1-5-3-6-2-4 (which is the firing order used by most straight-six engines), rather than the common V6 firing order of 1-2-3-4-5-6 or 1-6-5-4-3-2.

Problems with the Starter

A Jeep Compass that won't start but has power can be due to various factors, including a dead battery, poor battery connection, bad ground connection, a faulty alternator, or issues with the starter. Proper diagnosis and timely maintenance can help you keep your Jeep Compass running smoothly.

A low battery is the most frequent cause of a car having power but not turning over. Other causes include a bad starter, a bad alternator, or electrical issues. If you hear clicking, whirring, or nothing at all when trying to start your car, you may have a bad starter, malfunctioning alternator, or low battery.

You can try to jump-start your car while it has a bad starter, but there's no guarantee that it will work if the starter has failed completely or has a mechanical issue. A quick fix to get your starter going is to gently tap it with a hammer.

Straight-six engines typically use a firing order of 1-5-3-6-2-4, which results in perfect primary and secondary balance. However, a firing order of 1-2-4-6-5-3 is common on medium-speed marine engines.

What is the firing order on a 2007 Jeep Grand Cherokee 3.7 L? ›

The firing order is 1-6-5-4-3-2.

Yes, these are interference engines! Welcome!

With its standard 3.7-liter single-overhead-cam V6 engine with 210 horsepower and 235 pound feet of torque, the Liberty can also pull a 5,000-pound boat or trailer, which reviewers find impressive, considering its compact size.